2 vessels steam heating way 7BBLbrewhouse on skid, including control panel, with pipe lines preinstalled. Vessel interior 2B finish with passivation, exterior #4 brushed finish. Vessel bottom and cylindrical sides are insulated with 80mm PU insulation,Horizontal ss wort grant tank with LED light, top and side observation glass. Include：
1X7BBL Insulated Mash/Lauter Tun
40% head space enable you to brew enough beer each batch for you 7BBL fermenter. Cone head. Steam heating way, rake & plow system, 4” hydrator. LED light. Top DN400 glass manway and side 535×415 square manway.Milled false bottom firmly affixed to vessel floor, middle 2 piece removeable with handle.5 wort draw off concentric ports provides even runoff for Lauter and Vorlauff.
Grist Hydrator Assembly is top-mounted with post hot/cold liquor mixing station for consistent grist hydration of the Mash.
Under Screen CIP System with sprayer head assemblies allow the bottom of the Lauter screens and vessel dish bottom to be cleaned in place.
RTD Mash Temperature sensor for monitoring internal mash temperature inserts on vessel sidewall.Sparge Assembly and Hot/Cold mixing spool with diaphragm valve to allow both hot and cold liquor to be blended in route to Mash Tun or Sparge ring assembly.
1X7BBL Brew Kettle/Whirlpool Tun
Working volume 7BBL, with 40% head space, cone head. Steam heating way, Top DN400 glass manway. LED light. Condensate pipe with cooling water line. Kettle Temperature RTD sensor for accurate process control. Wort Dam to prevent trub from entering plate heat exchanger during cast out to fermentation cellar.
2xSanitary pump.
1.5kw, flow rate 5m/h. sus304 pump head
Preinstalled pipe lines
1.5” Sanitary pipe lines preinstalled. Centralized pipe direction control on both sides of the working desk. For easy control wort flow to which line. Several sight glass installed on MLT and KWT pipe lines. Pressure gauge installed on pump and HX place to monitor pump and HX inside pressure. Wort Filter option to HX. Check valves on pump line to prevent liquid backflow. Flow mater installed on mixing water line to hydrator. Allow to control the exact volume of hot water/brew water or mix water inside MLT.
1×6 m2 2 stage plate heat exchanger
1xControl panel
Main function:
VFD control for 3xpumps and rake motor control. Automatic temperature control for MLT and KWT. Sensor installed to prevent 2xwort pumps from idling without liquid. Flow meter control, to control the exact volume of hot water/brew water or mix water goes inside MLT.
Reviews
There are no reviews yet.